BH1750 LUX light sensor
Information
The BH1750 is a light intensity sensor that can be used to adjust the brightness of display in mobiles and LCD displays. It can also be used to turn the headlights of cars on/off based on the outdoor lighting. The sensor uses I2C communication protocol so that makes it super easy to use with micro controllers. The SCL and SDA pins are for I2C.
There is no calculation needed to measure the LUX value because the sensor directly gives the lux value. Actually, it measures the intensity according to the amount of light hitting on it. It operates on voltage range of 2.4V-3.6V and consumes really small current of 0.12mA. The results of the sensor does not depends upon the light source used and the influence of IR radiation is very less. There are very less chances of any error because the variation in measurement is as low as +/-20%.
Setup
In order to use the BH1750 LUX light sensor use the following settings:
Mandatory
- Hardware
- BH1750 LUX light sensor
Types : light
- Address
- <I2C Address>,[I2C Bus] where the I2C bus is optional
Ex:0x3f
Other settings can be found at the sensor setup information