Sequent Microsystems 8 Relay Card Ver. 1 - 2
Information
Perfect add-on to your project when you have to control large number of loads. Stackable to 8 layers, the card can add up to 64 relays to each Raspberry Pi in a compact form factor.
Pluggable connectors make the 8-RELAYS card easy to use when multiple cards are stacked up. All relays have NO and NC contacts and can switch 120VAC/8A or 24VDC/8A.
Status LEDs conveniently grouped on one side of the board show when relays are on or off. A power LED shows when power is applied. A reset switch permits shutting down the Raspberry Pi without the use of a keyboard and monitor.
Setup
In order to use the Sequent Microsystems 8 Relay Card Ver. 1 - 2 use the following settings:
Mandatory
- Hardware
- Sequent Microsystems 8 Relay Card Ver. 1 - 2
- Address
- Enter the relay number from 1 - 8. Optional add the stack level number. Default 0.
1,2
Other settings can be found at the relay setup information
This post is licensed under CC BY 4.0 by the author.