Live USB camera
Information
Use any USB webcam that is supported by Linux.
Warning
You can only have one live streaming webcam. So when you add this type of webcam you cannot add another of this type. Also this will eliminate the use of the RPI live webcam as that is using the same hardware chip on the Raspberry PI.
Controls
As this is a Video4Linux device, you can use v4l2-ctl
tools to control the focus, white balance and other options. This is not possible with the TerrariumPI software. A good website with more information and how to use it.
Webcam type: Live streaming
Setup
In order to use the Live USB camera use the following settings:
Mandatory
- Hardware
- Live USB camera
- Address
- Enter the device path
Ex:/dev/video0
Other settings can be found at the webcam setup information
This post is licensed under CC BY 4.0 by the author.