Sensirion SHT3X sensor
Information
SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperature platform.
Features
- Fully calibrated, linearized, and temperature compensated digital output
- Wide supply voltage range, from 2.4 V to 5.5 V
- I2C Interface with communication speeds up to 1 MHz and two user selectable addresses
Setup
In order to use the Sensirion SHT3X sensor use the following settings:
Mandatory
- Hardware
- Sensirion SHT3X sensor
- Types
humidity, temperature
- Address
- <I2C Address>,[I2C Bus] where the I2C bus is optional
Ex:0x44
Other settings can be found at the sensor setup information
This post is licensed under CC BY 4.0 by the author.