Sequent Microsystems 4 Relay Card
Information
Drive 8A/240VAC loads and read 3V to 240V, AC or DC, opto-isolated inputs for all your Home or Industrial Automation Projects
Perfect add-on to your project when you have to control large number of heavy duty AC loads and/or you have to read wide range inputs. Stackable to 8 layers, the card can add up to 32 relays to each Raspberry Pi in a very compact form factor. In addition, you can read up to 32 opto-isolated inputs.
Pluggable connectors make the 4-RELAYS card easy to use when multiple cards are stacked up. All relays have Normal Open and Normal Close contacts and can switch up to 8A/240VAC.
The optically isolated universal inputs can read AC or DC signals from 3V to 48V. The input connectors have a low voltage port which can read signals between 3V and 24V, and a high voltage port which can read signals between 24V and 48V.
Setup
In order to use the Sequent Microsystems 4 Relay Card use the following settings:
Mandatory
Hardware : Sequent Microsystems 4 Relay Card
Address : Enter the relay number from 1 - 4. Optional add the stack level number. Default 0.1,2
Other settings can be found at the relay setup information